Home » FLIR b60 Infrared Camera
FLIR b60 Infrared Camera
Sorry, this product is discontinued and is no longer available for purchase. Please call 1-877-766-5412 to find a suitable replacement.
The FLIR b60 lightweight infrared camera is a heavyweight-performing infrared camera specifically designed for building inspections such as missing insulation, HVAC heating and cooling issues, moisture detection, electrical problems, plumbing problems, termite & pest infestation, and much more.
What's Included:
Applications:
- Water Damage - Water leak on ceiling, wall and roof top
- Insulation - Energy loss, home inspection and HVAC
Industry-Leading Warranty
The FLIR b60 is backed by FLIR Systems' new 5-10-2 Protection warranty. 5-year warranty on the battery, 10-year warranty on the detector (micro-bolometer) and 2 years warranty on the camera.What's Included:
- 1GB microSD card
- MiniSD adaptor
- Rechargeable battery
- Power supply
- USB cable
- Lens cap
- Carrying case
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- IR Image Resolution — 32,400 pixels (180 x 180) Infrared resolution
- Visible Light Digital Camera — 2.3MP resolution with flash provides sharp images regardless of lighting conditions
- Insulation Alarm — Detects areas that don’t fulfill the insulation requirements
- Dew Point Alarm — Displays areas with risk of surface condensation where mold growth could occur
- Scalable Picture in Picture (PIP) Fusion — Displays thermal image super-imposed over a digital image and is scalable to resize the thermal image
- Bright LED Lamps — Allow the visual camera and fusion to be used in poorly lit environments
- Optimized Temperature Range — Fromb –4 to 248°F (–20 to 120°C) targeting insulation, HVAC, and building applications
- ± 2% Accuracy — reliable temperature measurement
- Thumbnail Image Gallery — Allows quick search of stored images
- Li-Ion Rechargable Battery — lasts >5hrs continuous use; replaceable
- Copy to USB — Easy upload of images from camera to USB memory stick
- Laser LocatIR™ Pointer — Pinpoints a reference spot with a laser
- Laser Marker - Marks the point on the IR displayed image as to where the Laser pointer is targeting
- Area (Min/Max) Mode — Shows the Minumum or the Maximum Temperature reading within the selected area
- Auto Hot/Cold Spot Marker - Marks the area that automatically finds the hottest or coldest spot within the box.
- Voice Comment Recording - on images & can be integrated onto report
- Wireless Communication - Bluetooth Transmitter with METERLiNK
- Includes
— Memory Card with adapter (stores >1000 Radiometric JPEG images),
Li-Ion rechargeable battery, power supply, QuickReport software, USB
cable, hand strap, camera lens cap, and hard case
| Features | |
| Temperature range | -4°F to 248°F (-20°C to 120°C); Optional Higher Temperature available |
| Image Storage | 1000 radiometric JPEG images (SD card memory) |
| Imaging Performance / Image Presentation | |
| Frame Rate | 9Hz |
| Field of view/min focus distance | 25° x 25°/3.9" (0.1m) |
| Focus | Manual (Minimum focus distance 1.3ft/0.4m) |
| Thermal sensitivity (N.E.T.D) | <0.07°C a t30°C |
| Detector Type - Focal plane array(FPA) uncooled microbolometer | 180x180 pixels |
| Spectral range | 7.5 to 13 µm |
| Display | Built-in 3.5" color LCD |
| Image modes | Thermal/Visual/Picture-in-Picture Fusion (Fixed) |
| Image annotation | Voice (60 sec) |
| Video Lamp | Bright LED lamp |
| Laser Classification/Type | Class 2/Semiconductor AlGalnP Diode Laser:1mW/635nm (red) |
| Set-up controls | Mode selector, color palettes, configure info to be shown in image, local adaptation of units, language, date and time formats, and image gallery |
| Measurement modes | 1 Spotmeter (Center spot), 1 Box area (full image with min/max), 1 Isotherm (above/below) |
| Measurement correction | Reflected ambient temperature & emissivity correction |
| Battery Type/operating time | Li-Ion/ >5 hours, Display shows battery status |
| Charging system | In camera AC adapter/2 bay charging system |
| Shock | 25G, IEC 68-2-29 |
| Vibration | 2G, IEC 68-2-6 |
| Dimensions/Weight | 9.3x3.2x6.9" (235x81x175mm)/<1.32lbs (600g), including battery |
| Warranty | 2 years (Warranty extended to 2 years when the camera is registered) |
FLIR Software Packages
QuickReport™ PC software enables users to Organize, Analyze and Create Reports with FLIR Cameras.FLIR Build IR Software package specifically designed to carry out advanced analysis of building structures. It is used to analyze images taken with an infrared camera, and create inspection reports based on these images.
FLIR Reporter Ver.8.5 is a powerful software for creating compelling and professional, fully customized, easy-to-interpret reports in a standard MS Word Document. You can create a report by simply Dragging and Dropping your images on a desktop icon or using the Wizards to guide you step-by-step through the process. The saved document is a "live" report with full access to the analysis tools and temperature measurement data.
The reports can be multi-page and include all of your IR inspection data-infrared and visual images, temperature measurements, voice comments and text notes.
Product brochures
Case studies
Product manuals
Video
No user reviews available.
