FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A
FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A
Downloads:
datasheet

FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A
Model: CM174

This clamp meter has a built in thermal imager allowing you to visually identify electrical problems you normally wouldn't see. It also has a narrow jaw and built-in worklight helping you access tight areas in dark spots.

$499.99 USD

Add In House NIST Traceable Calibration to your CM174


Only 5 left in stock




Recommended Accessories



FLIR CM174 True RMS AC/DC Clamp Meter Offers

Catch issues you probably would have missed without a visual image with the FLIR CM174 Clamp Meter. Check for hazards to make sure its safe enough to make contact and use the laser to help pinpoint the problem the thermal imager shows you. This device helps you find and solve electrical issues fast. It fits in your pocket and its narrow jaw and built-in worklight helps you access difficult locations with lighting issues. This new and faster way to see what you are clamping on to will help you troubleshoot problems and verify your repairs.

Features

  • Conquer cluttered wires and cables – IGM can quickly guide you in the right direction
  • All-in-one tool – carry just one device and always have access to thermal imaging
  • Work safely – scan a panel or cabinet for hazards using IGM without direct contact
  • Center-point temperature to confirm hot spot
  • Amperage and voltage measurements to check the load
  • Laser and crosshair pinpoint the location of the problem found in thermal image
  • Narrow jaw and built-in worklights help you access difficult locations with lighting issues
  • Advanced electrical features: True RMS, LoZ, VFD Mode, Inrush, Smart Diode with Disable
  • Expandable to 3000 Amps AC with FLIR flex accessories

Applications

Ideal for the following applications: Electricians and Technicians, Plant Maintenance, HVAC, Preventative Maintenance, Automotive Industry, Check Loads and Verify Hot Spots

FLIR CM174 Specifications

Imaging Detector FLIR Lepton® microbolometer
Thermal Image Resolution 4800 pixels (60 × 80)
Field of View (V x H) 38.6° x 50.0°
Color Palettes Iron, Rainbow, Grayscale
Image Frame Rate 9Hz
Temperature Measurement Center point of thermal image
Temperature Distance to Spot Ratio 30:1
Spectral Response 8 to 14μm
Temperature Targeting Class 1 Laser Pointer and Crosshair on display
Emissivity Settings 4 Presets with Custom Adjustment
Display 6000 Count 2.0" (50mm) Color TFT
Jaw Opening 1.38" (35mm), 1250MCM
Category Rating CAT IV-600V, CAT III-1000V
Click here for complete specifications on the FLIR CM174

What's included with the FLIR CM174

  • CM174 Clamp Meter with Thermal Imager
  • 4 x AAA Batteries
  • Premium Silicone Test Leads
  • Quick Start
  • User Manual CD
  • Extended Warranty Registration Card

Introducing the FLIR CM174 Imaging Clamp Meter with IGM

Built-in Laser and Crosshair, See Hot Spots Immediately are just a few great features.

Click on a category to view a selection of compatible accessories with the FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A.

FLIR TA70 Alligator Clips TA70
CAT IV/CAT III-1000V slide-on connection with finger guards.




FLIR TA15 Universal Soft Sided Case TA15
This universal, multi-compartment soft sided case is designed to protect and carry your FLIR clamp meter, test leads, flex clamp accessory, or any other tool you may need.




FLIR TA72 3000A Universal Flex Current Probe Accessory, 10in TA72
Connect this universal flex current probe to most DMMs and clamp meters to get better readings with your existing meter. Now you can take accurate measurements in tight or awkward spots.




FLIR TA74 Universal Flex Current Probe, 3000A, 18" TA74
This current probe has a standard banana plug with a voltage signal output so you can connect it to most DMMs and clamp meters, regardless of brand to help you maneuver around tight spaces.




FLIR TA55 Line Splitter TA55
Provides easy and safe measurement of current and voltage from two or three wire outlets.




FLIR TA80 Premium Silicone Test Leads TA80
1000 Volt, 10 Amp Test Probes. Gold plated tips and high-strength stress relief integrated into the probe. 41" lead length with a total length of 46" including the probe.




Review the FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A

" data-description="This clamp meter has a built in thermal imager allowing you to visually identify electrical problems you normally wouldn't see. It also has a narrow jaw and built-in worklight helping you access tight areas in dark spots.">

Ask a question about the CM174:

comments powered by Disqus