FLIR CM74 True RMS AC/DC Clamp Meter, 600A
FLIR CM74 True RMS AC/DC Clamp Meter, 600A
Downloads:
datasheet

FLIR CM74 True RMS AC/DC Clamp Meter, 600A
Model: CM74

This Commercial Clamp Meter is designed to make it easy to work in tight spaces with its narrow jaw and high-powered LED worklight. It is a TRMS AC/DC meter that has all the electrical features you need to take safe and accurate readings.

$249.99 USD

Add In House NIST Traceable Calibration to your CM74


Availability: 4 to 5 Weeks




Recommended Accessories



FLIR CM74 True RMS AC/DC Clamp Meter Offers

This commercial clamp meter is designed to take measurements easier in tight and dark spots. It features a narrow jaw and a high-powered LED worklight to allow testing in crowded panels and cabinets a snap. It has a ton of advanced electrical features including Autoranging, True RMS Voltage and Current, LoZ, Inrush, VFD Mode, and an input for a flexible current probe accessory.

Features

  • Made with a narrow jaw for easy access to wiring in crowded panels and cabinets
  • Slim clamp design makes it convenient to carry in your back pocket
  • Dual bright high-powered LED worklights guide you to your target in poor lighting conditions
  • Advanced electrical features including: True RMS, LoZ, VFD Mode,Inrush, Smart Diode with Disable
  • Expandable to 3000A AC with TA72 & TA74 Flex Clamp Accessories (sold separately)
  • Min / Max, Hold and Auto Power Off with Disable
  • Premium gold-tipped silicone test lead accessories included
  • Large digit LCD display with bright backlight
  • Rubberized double molded hand grips reduce slippage

Applications

Ideal for the following applications: Electricians and Technicians, Plant Maintenance, HVAC, Preventative Maintenance, Automotive Industry, Check Loads and Verify Hot Spots

FLIR CM74 Specifications

DC Voltage 1000V
AC Voltage 1000V
VFD AC Voltage 1000V
LoZ Mode AC Voltage 1000V
DC Current 600.0A
AC Current 600.0A
Display Counts 6000
Jaw Opening 1.38" (35mm), 1250MCM
Category Rating CAT IV-600V, CAT III-1000V
Click here for complete specifications on the FLIR CM74

What's included with the FLIR CM74

  • CM74 Clamp Meter
  • 4 x AAA Batteries
  • Premium Silicone Test Leads
  • Quick Start
  • User Manual CD
  • Extended Warranty Registration Card

Click on a category to view a selection of compatible accessories with the FLIR CM74 True RMS AC/DC Clamp Meter, 600A.

FLIR TA55 Line Splitter TA55
Provides easy and safe measurement of current and voltage from two or three wire outlets.




FLIR TA80 Premium Silicone Test Leads TA80
1000 Volt, 10 Amp Test Probes. Gold plated tips and high-strength stress relief integrated into the probe. 41" lead length with a total length of 46" including the probe.




FLIR TA70 Alligator Clips TA70
CAT IV/CAT III-1000V slide-on connection with finger guards.




FLIR TA11 Protective Carrying Case for the CM7x and CM8x Series Clamp Meters TA11
Case made from durable EVA rubber. It features form-fitting instrument compartments, a concealed zipper to resist dirt, resilient nylon strap and a rugged, non-slip finish.




FLIR TA12 Protective Carrying Case for FLIR Test Accessories TA12
Case made from durable EVA rubber. It features form-fitting instrument compartments, a concealed zipper to resist dirt, resilient nylon strap and a rugged, non-slip finish.




FLIR TA15 Universal Soft Sided Case TA15
This universal, multi-compartment soft sided case is designed to protect and carry your FLIR clamp meter, test leads, flex clamp accessory, or any other tool you may need.




FLIR TA72 3000A Universal Flex Current Probe Accessory, 10in TA72
Connect this universal flex current probe to most DMMs and clamp meters to get better readings with your existing meter. Now you can take accurate measurements in tight or awkward spots.




FLIR TA74 Universal Flex Current Probe, 3000A, 18" TA74
This current probe has a standard banana plug with a voltage signal output so you can connect it to most DMMs and clamp meters, regardless of brand to help you maneuver around tight spaces.




Review the FLIR Systems CM74

" data-description="This Commercial Clamp Meter is designed to make it easy to work in tight spaces with its narrow jaw and high-powered LED worklight. It is a TRMS AC/DC meter that has all the electrical features you need to take safe and accurate readings.">

Ask a question about the CM74:

comments powered by Disqus