FLIR DM93 True RMS Industrial Multimeter with VFD Mode & Bluetooth, 1000V
FLIR DM93 True RMS Industrial Multimeter with VFD Mode & Bluetooth, 1000V
Downloads:
datasheet manual



Spend $200+ and Receive Free FLIR Products

Can't be combined with any other offer.


FLIR DM93 True RMS Industrial Multimeter with VFD Mode & Bluetooth, 1000V
Model: DM93

The DM93 Digital Multimeter with advanced VFD filtering helps you accurately analyze non-sinusoidal waveforms and noisy signals. METERLiNK® allows you to wirelessly communicate with your Thermal Camera.

$349.99 USD

Add In House NIST Traceable Calibration to your DM93


Only 2 left in stock




Recommended Accessories



FLIR DM93 True RMS Multimeter

The FLIR DM93 Digital Multimeter with advanced VFD filtering to help you accurately analyze non-sinusoidal waveforms and noisy signals found in VFD-controlled equipment.

DM93 Multimeter Features

VFD Mode

Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.

LoZ Mode

Use the Low Impedance Input filter to eliminate ghost voltage readings in long-run applications.

Continuous Data Recording

Detect intermittent glitches by allowing the FLIR DM93 to collect measurement data unattended over time.

Bright Dual-LED Worklights

Make your work safer and easier by illuminating dimly lit inspection areas.

METERLiNK® Compatibility

Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR infrared cameras.

Bluetooth Connectivity

Connect to Android devices for remote diagnostics in hard-to-reach and hazardous areas. Also, upload files without the need for special cords.

Rugged, Shock-Resistant

Double-molded rubber case design enhances reliability on the job site and durability for the long haul.

Convenience Features
  • No need to select AC or DC Mode for quick tests
  • Backlight features user-configurable timeout
  • Large, sharp display is easy to see
  • Tool-less battery changing
  • Built-in tilt stand

What's Included:

  • 6 AAA Batteries
  • User Manual/CD
  • CAT IV Silicon Test Leads
  • Type K Temperature Probe (400°F, 204°C)
  • Magnetic Hanging Strap
  • Alligator Clips
  • Limited Lifetime Warranty

FLIR DM93 Multimeter Specifications

Technical Summary

  Range Basic Accuracy
DC Voltage 1000.0 V +/- 0.05%
AC Voltage 1000.0 V +/- 0.05%
VFD Voltage 1000.0 V +/- 0.05%
DC Current 10.000 A +/- 0.2%
AC Current 10.000 A +/- 1.0%
Resistance 40.00 MΩ +/- 0.2%
Continuity Threshold 30 Ω +/- 0.2%
Frequency 100.00 kHz +/- 5 Digits
Capacitance 40.00 mF +/- 0.9%
Temperature -328 to 2192°F, -200 to 1200°C +/- 1.0%
Diode Test 2 V +/- 1.5%

General Information

Bluetooth Range Max 32 ft (10 m)
Display Counts 40,000
Safety Category CAT IV-600V, CAT III-1000V
Data Recording 20,000 Pts (125 days max)
Warranty Limited Lifetime
Certifications CE, UL, FCC
Click here for complete specifications on the FLIR DM93

Click on a category to view a selection of compatible accessories with the FLIR DM93 True RMS Industrial Multimeter with VFD Mode & Bluetooth, 1000V.

FLIR TA10-F Protective Carrying Case for the DM92/DM93, TA72/TA74 & CM55/CM57 TA10-F
Case made from durable EVA rubber. It features form-fitting instrument compartments, a concealed zipper to resist dirt, resilient nylon strap and a rugged, non-slip finish.




FLIR TA10 Protective Carrying Case for the DM92, DM93 & IM75 TA10
Case made from durable EVA rubber. It features form-fitting instrument compartments, a concealed zipper to resist dirt, resilient nylon strap and a rugged, non-slip finish.




FLIR TA12 Protective Carrying Case for FLIR Test Accessories TA12
Case made from durable EVA rubber. It features form-fitting instrument compartments, a concealed zipper to resist dirt, resilient nylon strap and a rugged, non-slip finish.




FLIR TA50 Magnetic Hanging Strap for the FLIR DM Series TA50
Hang your meter using this durable nylon strap on metal electrical cabinets-allowing you to focus on your testing. Designed for the DM Series, or any meter that accepts a 1" strap.




Review the FLIR DM93 True RMS Industrial Multimeter with VFD Mode & Bluetooth, 1000V

" data-description="The DM93 Digital Multimeter with advanced VFD filtering helps you accurately analyze non-sinusoidal waveforms and noisy signals. METERLiNK® allows you to wirelessly communicate with your Thermal Camera.">

Ask a question about the DM93:

comments powered by Disqus